Naman Automotive Solutions
Odhav, Ahmedabad, Gujarat
GST No. 24AHFPR6904G1ZC
TrustSEAL Verified
Call 0804764727046% Response Rate
SEND EMAIL
Product Details:
| Weight | 35 Kg |
| Input Voltage | AC 220 or 380V, 50/60 Hz |
| Input Power | 12.3 KVA |
| Input Current | 32 A |
| Output Voltage | 1-13V |
| Output Current | 3500 A |
| Welding Time | 0-99 Sec |
Product Details:
| Weight | 86 Kgs |
| Phase | Single Phase |
| Input Voltage | 380V, 50 Hz |
| Input Power | 26.8 KVA |
| Input Current | 60 Amp |
| One Side Welding Thickness | 0.8+1.5 mm |
| Input Gas Source Pressure | 6-10 Kg |
| Operation Way | 2500+2500, 2300+1900 mm |
Product Details:
| Brand | Naman |
| Model | Namtech MGW |
| Welding Current Range | 35-220A |
| Phase | Single Phase |
| Insulation Class | F |
| Protection Class | IP21S |
| Weight | 96 kg |
| Dimension (L x B x H) | 38 x 85 x 89 cm |
| Product Type | New |
| Duty Cycle | 35% |
The MIG welding process is semi-automated. This is also called as Gas Metal Arc Welding (GMAW). The process of MIG welding was developed in 1940. As this is a semi-automated process so there is a constant supply of filler wire in the form of MIG wire. This wire is being supplied by wire feeder which has a motorized function. The wire passed through the liner which also has a gas feeding through the same cable to the point where an arc is formed. The MIG welding is used in fabrication where higher production is required. The process needs electricity to produce heat, electrode or filler wire for the joint and inert gas to protect the welding joint from the air in the form of an inert gas of Co2. We ask you to buy MIG welder and if a robot is used in this welding process this welding becomes automatic. This MIG welding process is fast, cost effective and produces more welding units in a small period of time so it is a more effective method of welding.
The types of wire used are Carbon steel, stainless steel, and Aluminium. The wire feeder needs special change for the Aluminium wire filler. The carbon steel is best suited for the MIG welding. The welding by MIG are as welding is clean without smoke, very cheap, fast, time-saving in changing of the electrode is minimum so time efficient. It is good for spot and tack welds
Product Details:
| Dimension | 376x172x304 mm |
| Duty Cycle | 60% |
| Efficiency | 85% |
| Input Voltage | AC 220 - 380V |
| Output Current | 10 - 40A |
| Rated Output Voltage | 96V |
| No Load Loss | 40W |
| Welding Thikness | 12mm |
3.9/5
Reviewed by 22 Users
Most Relevant Reviews